Make Your Own Victa Crank Tools.

Learn How to Make your Own DIY Victa Crank Tools and save yourself some money!

Tools/Parts Required 

  • Angle Grinder/Dremel
  • Files/Sandpaper
  • 21mm and 17mm Socket

Step 1.

Determine which crank pin you have, note that there are 2 different types.

Step 2

Place the crank pin onto your Socket and mark the parts that will need to be cut or ground away.

Step 3

Finally grind the mark portions and carefully check with your crank pin until you have a snug fit.

Leave a Reply

Your email address will not be published. Required fields are marked *