Victa Axle Clip Replacement

Learn how to install a replacement axle clip for your Victa lawn mower.

Tools/Parts Required 

  • Multi-Grips/Pliers
  • Victa Axle Clip & Bush

Step 1.

Remove any remnants of the old axle clip or bushing. The bushing can be removed by opening it up and pulling it away from the axle.

Step 2

Place the new bushing in place, the same way as the old one was removed (it may be more difficult to pry it apart as the new plastic tends to be more rigid). Make sure the flat surface of the bushing is facing the ground.

Step 3

Ensure that the bushing is pushed flush against the wheel, then insert the axle in place. Insert the axle clip into the two holes present for it (it may be easier to slot into the hole at the back first, if necessary use pliers or multi grips to place the clip into the front hole).

Leave a Reply

Your email address will not be published. Required fields are marked *